Maintenance And Upkeep Of The Main Components Of The Air Compressor

In order to ensure the normal and reliable operation of the air compressor and the service life of the unit, it is necessary to develop a detailed maintenance plan, execute regular operation, regular maintenance, and regular inspection and maintenance, to keep the air compressor unit clean, oil-free, and dirt free.
The maintenance and upkeep of main components shall be carried out as follows:
A. When repairing and replacing various components according to the above table, it must be ensured that the pressure inside the air compressor system has been released, isolated from other pressure sources, the switch on the main circuit has been disconnected, and safety signs indicating that it is not allowed to close have been made.
B. The replacement time of compressor cooling lubricating oil depends on the operating environment, humidity, dust, and whether there are acidic or alkaline gases in the air. The newly purchased air compressor must be replaced with new oil after the first 500 hours of operation. Afterwards, it should be replaced every 4000 hours according to the normal oil change cycle. Machines that operate less than 4000 hours per year should be replaced once a year.
C. The oil filter must be replaced during the first 300-500 hours of operation, and after the second 2000 hours of use, it will be replaced every 2000 hours according to normal time thereafter.
D. When repairing and replacing the air filter or intake valve, it is important to prevent any debris from falling into the main chamber of the compressor. During operation, close the inlet of the main engine. After the operation, press the rotating direction of the main engine for rotation number by hand, and make sure there is no obstacle before starting the machine.
E. The tightness of the belt must be checked every 2000 hours of machine operation. If the belt is loose, it must be adjusted until the belt is tensioned; To protect the belt, it is necessary to prevent it from being scrapped due to oil contamination throughout the entire process.
F. Every time the oil is changed, the oil filter must be replaced at the same time.
G. Try to use original company components for replacement parts, otherwise the supplier will not be responsible for any matching issues.